Allen-Bradley 1732ES-IB12XOB4, User Manual, Page: 30 / 176

30 Rockwell Automation Publication 1791ES-UM001G-EN-P - November 2016
Chapter 2 About the Modules
Follow Precautions for Use Follow the precautions for use listed here and throughout this manual.
ATTENTION: Follow Safety Standards for Installation and Testing
• Use only appropriate components or devices complying with relevant safety
standards corresponding to the required safety category and safety integrity
level:
• Conformity to requirements of the safety category and safety integrity
level must be determined for the entire system.
• We recommend you consult a certification body regarding assessment of
conformity to the required safety integrity level or safety category.
• You must confirm compliance with the applicable standards for the entire
system.
• Perform testing to confirm that all device configuration data and operation
is correct before starting system operation.
• After installation of the module, a safety administrator must confirm the
installation and conduct trial operation and maintenance procedures.
ATTENTION: Personnel responsible for the application of safety-related
programmable electronic systems (PES) shall be aware of the safety
requirements in the application of the system and shall be trained in using
the system.
ATTENTION: Do not disassemble, repair, or modify the module. Any changes
to the module can result in the loss of safety functions.
In case of malfunction or damage, no attempts at repair should be made. The
module should be returned to the manufacturer for repair. Do not dismantle the
module.
ATTENTION: Do not use EtherNet/IP standard I/O data or explicit message
data as safety data.
ATTENTION: Installing or Replacing Modules
• When installing or replacing modules, clear any previous configuration
before connecting the module to the network or connecting input or output
power to the module.
• When replacing a device, configure the replacement device suitably and
confirm that it operates correctly.