13
Initial Installation
,QVWDOOLQJD0RELOH$QWHQQD
Use a 50
:
coaxial cable to connect the antenna.
Mobile antennas require an appropriate mounting
base for proper installation and operation. For more
information, see the instruction of your antenna.
IMPORTANT
After installing your antenna, ensure that you have the best possible SWR
reading. High RF environments can cause severe damage to your unit.
Ensure that you are not in a high RF environment when operating the radio.
8VLQJWKHPRXQWLQJEUDFNHW
1.
Drill 4 holes where the mounting bracket
is to be installed.
Approx. 5.5-6mm (1/4”) when using nuts; approx.
2-3 mm (1/8”) when using self-tapping screws.
2.
Insert the supplied screws, nuts and
washers through the mounting bracket
and tighten.
3.
Adjust the angle to suit your favorite
position.
NOTE
Alinco’s warranty does not include installation fee.
Magnet base
Screw-fixed base
<For making 4+/-0.2mm hole in
globe box bottom>
Car body
Mounting bracket
Tapping screw
Washer
VOL
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
