23
Basic Operations
3.
After pressing the dial knob, rotating the
dial will change the frequency by 1Mhz
depending on which direction the dial is
rotated (or if the UP/DOWN keys on
microphone is pressed).
4.
Pressing the PTT key or any key except
VOL and dial knob will complete the
setting and the display will return to the
original status.
NOTE
The shift setting and operation is temporary possible in the memory mode.
However, shift setting will be deleted when you change the channel, turn off
etc.
0HPRU\0RGH
This mode allows recalling and operating the preprogrammed frequency or setting. This unit provides up to
1000 common memory channels on the left and right bands. (000 to 999CH) , 100 dual memory channels
(d00 to d99 CH), 5 pair of program-scan memory (P1A/P1b to P5A/P5b), 1 pair of VFO auto-program
memory scan, 1 CALL channel each for V and U (CALL), and 100 individual memory channels for V and U
in advanced mode (L00 to L99 / r00 to r99).
NOTE
Two type of memory channels are used in this radio.
Y
ommon memory channels can be program and recall on both left and right bands.
Y %
ndividual memory channels are dedicated to left or right band only.
Individual memory channels provides as if operating two monoband radios’ memory
channels.
3URJUDPPLQJPHPRU\FKDQQHOV
1.
Select a frequency to be programmed in
the VFO mode and set the parameters as
appropriate. Refer to the next page for
programmable parameters.
2.
By Pressing FUNC key, [FUNC] and
[Memory number] icons will appear on
the display.
3.
Rotate the dial (or press UP/DOWN keys
on microphone) to select desired memory
channel number.
An empty channel is shown with a flashing [Memory
number] icon.
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
