24
Basic Operations
4.
By pressing V/M key while [FUNC] icon is
on the display, programming will be
completed and you will hear a beep
sound.
IMPORTANT
Be certain memory protect function in set mode is off to edit the memory
channels.
(DV\PHPRU\SURJUDPPLQJPRGH
One-touch programming is possible if you don’t care selecting specific memory channel
Number.
Select a frequency to be programmed in the VFO mode and set the parameters as
appropriate. Refer to the below for programmable parameters.
Press and hold MW key until a beep sounds, the current setting will be stored in an empty
memory channel of the lowest number and the number flashes 2 times.
3URJUDPPDEOHGDWDLQWKHPHPRU\FKDQQHO
Each memory channel including 000 to 999, d00 to d99, L00 to L99, CALL channel, APL/
APH and P
{
A/P
{
b channels can store following:
Y "
requency
Y +
utput power
Y
olor setting
Y /
hift frequency
Y /
hift direction (+ / -)
Y 0
one encoder frequency
Y 0
one decoder frequency
Y 0
one encoder / decoder setting
Y
CS code
Y
CS setting
Y *
arrow mode setting
Y
M mode setting
Y
ell setting
5HFDOOLQJDPHPRU\FKDQQHO
1.
Select the memory mode by pressing V/M
key.
Repeat to switch between memory and VFO mode.
2.
Select a memory channel.
Rotating dial (or pressing UP/DOWN keys on
microphone) will increase or decrease a memory
channel number by 1 channel step.
memory channel
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
