28
Basic Operations
&KDQQHOQDPH$OSKDQXPHULFUHJLVWUDWLRQ
IXQFWLRQ
The memory channel stored in the common memory, individual memory, dual memory and
program scan memory can be displayed with an alphanumeric tag instead of the default
frequency display. There are 67 characters available including A-Z, 0-9.
1.
Select memory mode on the MAIN band
and then select a channel to be
programmed.
2.
Press H/L key while pressing and holding
the FUNC key.
3.
The display shows [A ]
À
ashing.
4.
Rotate the dial on the MAIN side to select
a character to be programmed.
5.
By pressing the dial knob, the character
stops
À
ashing and is entered.
An identical character to the one just entered flashes on
the immediate right, ready to be edited.
6.
Enter the next character by repeating
above 4 and 5 up to 6 digits.
7.
Press and holding the dial knob during
programming will delete all characters to
be programmed.
8.
Pressing any key other than the dial knob
will complete the setting and the display
will return to the original status.
NOTE
Press FUNC key to display frequency. Memory channel number remains
displayed. Press PTT to return to show the channel name.
Any key operation will also stop displaying the frequency and works as
asigned.
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
