33
Basic Operations
5.
Releasing the PTT key will complete the
transmission and the unit will return to
the receive mode.
NOTE
Pressing the DOWN key together with the PTT key will transmit the Tone
Burst signal.
Pressing the UP key with PTT key to transmit the Auto-dialer tones.
IMPORTANT
If you press the PTT key while out of the transmission frequency
range, the [OFF] icon will appear on the display and no transmission
will occur.
6HOHFWLQJ2XWSXW3RZHU
1.
Press H/L key. The Output power
switches among High, Middle and low.
At middle power, the [
], and at low power, the [
]
illuminates. Nothing appears on the display at high
power. The default is high power.
The RF meter shows
when transmitting at low
power, and
at middle power, and
at high power.
Transmission
Power
IMPORTANT
The output power level cannot be changed during transmission.
The output power level cannot be changed during scanning.
NOTE
The Middle output setting is adjustable in set mode (P.54); however, RF-meter
level indication will remain unchanged.
at low power
at middle power
at high power
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
