46
Set mode menu
0HQX.H\KROGLQJWLPHVHWWLQJ
This is to change the time for pushing and holding keys. Shorter value allows faster
operations, but may cause erroneous key operations. This value affects press-and-hold key
operations such as key-lock, activating scans,memory programming etc.
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 19.
Factory default setting is [2] seconds.
2.
Rotate the right dial to select a value.
Available values are 1 to 5 in seconds.
This setting becomes effective regardless
of bands and VFOs.
3.
Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
0HQX$XWRUHSHDWHUVKLIW
When the operating frequency is tuned within the band shown below in VFO mode, a repeater
shift will apply automatically.
1.
Press and hold FUNC key to enter the
parameter set mode. Press dial to select
menu 20.
2.
Rotate the right dial to select a
parameter, ON to activate, OFF to
deactivate.
This setting becomes effective
regardless of bands and VFOs.
3.
Press any key to set and exit, or
press the dial or UP/DOWN keys to
set and move to another menu.
NOTE
Use VFO auto program to customize auto repeater setting (See page 57)
Lower
limit in
MHz
Upper
limit in
MHz
Shift
width &
direction
T
145.100 145.500
-600KHz
146.610 147.000
-600KHz
147.000 147.400
+600KHz
442.000 445.000 +5MHz
447.000 450.000 -5MHz
E
145.600 145.800
-600KHz
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
