43
Set mode menu
0HQX'LVSOD\LOOXPLQDWLRQWLPHU
The display illuminates brighter for a period of time set in here. The brightness is 5 levels
higher than the value set in menu 13. This value becomes effective regardless of band and
VFO.
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 14.
2.
Select a timer value by rotating the right
dial. Available parameters are shown
below.
3.
Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
OFF
20
10
7
5
3
NOTE
Select the dimmer level 0 in previous menu, so that the display illuminates
only when a key is operated except PTT. This setting mey be comfortable
while driving at night.
0HQX&RQWUDVWVHWWLQJ
This is to set the contrast value of displayed characters. The change may not be very obvious
depending on the display color you selected.
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 15.
Factory default setting is [3].
2.
Select a value by rotating the right dial.
Available parameters are 1 to 5. This
value becomes effective regardless of
band and VFO.
3.
Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
