47
Set mode menu
0HQX5HVWRUHIXQFWLRQ
This is to restore most parameters being set in the set mode. This function recalls most
parameters even after a reset is being performed, allowing you to recover them quicker. It is
recommended that you use this function after the setmode setting is completed to suit your
preference.
IMPORTANT
Color setting and some other setting out of set mode cannot be restored. Color
display and some other parameters that may relate to non-set mode setting can’t be
restored and recalled.
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 21.
Factory default setting is [OFF].
2.
Rotate the right dial to select SAVE and
then press and hold FUNC key until
hearing the beep.
3.
The data is restored and exits the set
mode.
4.
To recall restored data, repeat above 1
and select YES, then press and hold
FUNC key until hearing the beep.
The data is recalled, turns off then turns on
automatically.
5.
Reset function will not delete restored
setting data. Simply repeating “YES”
operation won’t overwrite the restored
data either. In order to change the
restoring data, repeat the operation and
select DELETE then press and hold FUNC
key until a beep is heard.
Repeat to “SAVE” operation to store new
data.
IMPORTANT
Memory channel restore function is not available.
It is recommended that you use DR-735 clone-utility to recall memory channels and/
or detailed customized setting.
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
