70
Useful functions
4.
The master radio may stay turned on for
the next clone. Turn off the unit to exit
from the clone mode.
Setting on the slave side
1.
Turn on and set to VFO or memory mode.
2.
Operate the master side; [CLONE LD
]
appears as it starts receiving the cloning
data.
will change during data transferring.
3.
When the transmission is successfully
¿
nished, [CLONE PASS] appears.
4.
Turn off power. Disconnect the cable and
repeat above to clone the next slave unit.
If the data is not successfully transmitted, turn off both
units, make sure the cable connection is correct and
repeat the entire operation from beginning.
IMPORTANT
Never disconnected the cable while data is being transmitted in the clone
mode.
It may cause damages to the radios.
When transmission is finished
During transmission
When transmission is finished
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
