61
Useful functions
3ULRULW\6FDQ
This is to monitor a priority channel for 0.5 second once every 5 seconds.
When a signal is being received in priority channel, monitors it for 2 more seconds.
This feature is available and programmable only by using the Clone utility provided by Alinco
for free (an optional PC connection cable required).
1.
Use the cloning software to program
frequency. For details please refer to the
instruction manual of the utility software.
2.
To start priority scanning, press dial knob
while pressing FUNC key. To stop
scanning press any key on monitoring
side or press PTT. [S] icon will disappear.
NOTE
The receiving audio will be intermittent due to monitoring the priority channel.
This is a common feature for commercial-use radios but not amateur radio for
this reason,so this function is accessible only through the utility software.
In case squelch is left open, it monitors the priority channel for 2 seconds every
time.
7RQH6FDQ
This function automatically searches for the CTCSS tone an incoming signal might carry. This
feature is useful to search for the encoding tone of a repeater, or to communicate with a
station operating in TSQ (CTCSS squelch) mode.
1.
Press FUNC then
key to enter the tone
setting in the band you wish to tone-scan.
Press
to display T and SQL icons.
Press and hold the dial of the same side
until the scan starts. Pressing UP/DOWN
keys until start scanning and release
immediately also activates the tone-
scan. Display
À
ashes while scanning.
2.
It stops scanning when a matching tone
is detected, and decoded signal will be
heard. Press any key other than UP/
DOWN to stop scanning. Press any key
again to exit from tone-scan.
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
