36
6HWPRGHPHQX
0HQX&KDQQHO6WHSVHWWLQJ
This is to select the channel step to be used in the VFO mode. Details are already explained
in P.21. The values are variable only in the VFO mode. Warning beep sounds when operated in
the memory mode.
0HQX0RGXODWLRQPRGH
This is to select the operating modulation mode. AM mode is not available for transmitting.
A narrow FM mode is becoming popular in amateur radio, and is also used in VoIP
communications.
The modulation level becomes half in narrow mode and receiving audio level increases. The
mode selection is stored independently for each band and memory channel.
This operation is possible in the memory mode but the change affects only temporary.
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 02.
Factory default setting is [Auto].
2.
Rotate the dial to select FM, NFM, AM or
NAM. When NFM or NAM selected, Nar
will appear on the display.
3.
Repeat the same operation by selecting
another side of VFO if the same mode is
always desired when operating the same
band.
4.
Press any key to set and exit, or press the
dial or UP/DOWN keys to set and move to
another menu.
0HQX0LFURSKRQHJDLQDGMXVWPHQW
1.
Press and hold FUNC key to enter the set
mode. Press dial to select menu 03.
Factory default setting is [0dB]. This
value becomes effective regardless of the
band or VFO.
2.
Rotate the right dial to select a value
between -23dB and +23dB.
Selecting (-) will decrease and (+) will
increase microphone gain. The
microphone gain is adjustable while
transmitting.
NAM
AM
NFM
FM
AUTO
Summary of Contents for DR-735T/E
Page 82: ...80 MEMO...
Page 83: ...81 MEMO...
