4.3
Shutting down the scanner
It is recommended to shut down the system at the end of each day to allow software updates to be installed.
Note:
If you do not shut down the scanner correctly, the next time you log on, a message will be displayed notifying
you of this and will remain until you acknowledge it. Incorrect shutdown can be caused by letting the battery run
down and by pressing the Power button for longer than 4 seconds.
To shut down the scanner:
l
Press and release the Power button to shut down the system. The Power button is located on the bottom right of
the screen in iTero Element 5D systems and on the top right of the screen in iTero Element 5D Plus systems.
Warning:
Pressing the button for more than 4 seconds activates a hard reset, which can cause problems such
as gray and blue screens.
4.4
Moving the scanner
4.4.1
Moving the iTero Element 5D wheel-stand configuration scanner
The scanner can be moved between rooms within the office.
Note:
To ensure maximum system protection, it is recommended to have 2 people move the scanner.
To move the scanner between rooms:
1. Ensure that the wand is firmly positioned in the cradle.
2. Unplug the system from the wall outlet.
3. Move the system to its new location and plug it into a wall outlet.
4.4.2
Transporting the iTero Element 5D laptop configuration imaging system
To ensure maximum system protection, it is recommended to follow the instructions below when transporting the
system:
1. Attach the blue protective sleeve onto the wand.
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
© 2022 Align Technology, Inc. All rights reserved.
53
Summary of Contents for iTero Element 5D
Page 1: ...it starts with iTero Element 5D and iTero Element 5D Plus imaging systems User manual...
Page 2: ......
Page 245: ......
