Align Technology iTero Element 5D User Manual Download Page 172

Page: 172 / 246

10.5

Editing tools

After you have scanned the model, you can edit it using the following tools:

Delete Segment tool, described in

Deleting a segment

Delete Selection tool, described in

Deleting a selection

Fill tool, described in

Filling in missing anatomy

Disable A.I. Cleanup tool, described in

Disabling A.I. cleanup

The editing tools are accessed by pressing on the screen.

Figure 148: Editing tools

10.5.1 Deleting a segment

The Delete Segment tool enables you to delete the entire scanned segment.

To delete the segment:

1. Press the screen to display the editing tools.

iTero Element 5D and iTero Element 5D Plus imaging systems User manual

144

Summary of Contents for iTero Element 5D





















































































































































































































































Search results

Summary of Contents for iTero Element 5D

Reviews:

Brands by name

Popular brands

Align Technology iTero Element 5D, User Manual

Search results

Summary of Contents for iTero Element 5D

Reviews:

Brands by name

Popular brands