l
Toggle between the 3D and the viewfinder display, described in
Toggling the 3D and viewfinder display
l
Toggle between displaying a color image or a NIRI image in the viewfinder, as described in
color and NIRI images in the viewfinder
– relevant for iTero Element 5D and iTero Element 5D Plus systems
only
After scanning, you can edit the scan by:
l
Deleting a segment, as described in
l
Deleting a selected area, as described in
l
Capturing areas with missing anatomy, as described in
l
Displaying the excess tissue around the edges of the 3D model, as described in
When you have finished scanning the patient, tap
on the toolbar to move to
View
mode, where you can
ensure that the scan is complete before sending it to the lab or storage, as described in
5.5.1
Scanning guidance
As soon as you move to Scan mode, the recommended scanning sequence for the selected scan segment is
displayed in the center of the scanner window. It will automatically disappear after a short while, or you can tap
anywhere on the screen to hide it.
iTero recommends you follow the scanning sequence for best results.
Figure 105: Recommended scanning sequence – lower jaw
Note:
If you select the
Don’t show again
check box, this guidance will not be displayed in future scans. You can
return the guidance by enabling it in the
Scan
settings, as described in
.
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
© 2022 Align Technology, Inc. All rights reserved.
107
Summary of Contents for iTero Element 5D
Page 1: ...it starts with iTero Element 5D and iTero Element 5D Plus imaging systems User manual...
Page 2: ......
Page 245: ......
