Display/hide the margin line of the prepped tooth.
Relevant for Restorative case types only.
Show/hide the ditch created by the Modeling team. This will be enabled in the
Viewer only after the modeling phase.
Relevant for Restorative case types only.
Toggle between viewing the model in color or in monochrome.
Show/hide the occlusal clearance between the opposing teeth, as described in
Working with the Occlusal Clearance tool
Note:
When the case status is
iTero Modeling
, it is in the early stages of modeling and the margin line and die
tools are disabled.
When the modeling process is completed, and the die and margin line have been edited, the changes appear in
color on the model and the tools are displayed in color, indicating that they are active.
5.9
Removing the wand sleeve
The wand sleeves are intended for single-patient use and must be disposed of and replaced after each patient in
order to avoid cross-contamination.
To remove the wand sleeve:
1. Once the scan is complete, or if the scan has been interrupted, press lightly on the center of the sleeve, slowly
pull the sleeve off the wand, and discard.
Figure 123: Removing a wand sleeve
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
© 2022 Align Technology, Inc. All rights reserved.
121
Summary of Contents for iTero Element 5D
Page 1: ...it starts with iTero Element 5D and iTero Element 5D Plus imaging systems User manual...
Page 2: ......
Page 245: ......
