Align Technology iTero Element 5D User Manual Download Page 62

Page: 62 / 246

You will receive an email from an iTero representative with login credentials and detailed information on how to
proceed with the

Make It Mine

process.

Note:

If you accessed the Demo Mode from the

Welcome

page before registering the scanner, you will have to

restart the scanner to access the

Make It Mine

option.

To register the scanner:

1. In the

Welcome

page, select the required language.

2. Tap

Make It Mine

The

Connect

page is displayed, showing a list of available networks.

Figure 20: Connect page listing the available networks

iTero Element 5D and iTero Element 5D Plus imaging systems User manual

Summary of Contents for iTero Element 5D





















































































































































































































































Search results

Summary of Contents for iTero Element 5D

Reviews:

Brands by name

Popular brands

Align Technology iTero Element 5D, User Manual

Search results

Summary of Contents for iTero Element 5D

Reviews:

Brands by name

Popular brands