Alien Hero ALIEN654 Operation Manual Download Page 82

Page: 82 / 156

ALIEN HERO INSTRUCTION MANUAL

Last Revised 16/10/2013

7.2 Backing up by Normal Video Search

Purpose:

The recorded files can be backed up to various devices, such as USB devices (USB
flash drives, USB HDDs, USB writer) and SATA writer dependent on model.

Backup Steps:

Enter Export interface.

Menu>Back Up>Normal

Set search condition and
click

Search

button to enter

the search result interface.

Figure 7.2a Normal Video Search for Backup

Select record files you want to backup.

Click button

to play the recorded file if you want to check it.

Click the checkbox before starting the backup.

Note:

The size of the currently selected files is displayed in the lower-left corner of

the window.

Figure 7.2b Result of Normal Video Search for Backup

Export

Click

Export

button and start backup.

Note:

If the inserted device is not recognised:

Click the

Refresh

button.

Reconnect device.
Check for compatibility from vendor.
You can also format USB flash drives or USB HDDs via the DVR.

Summary of Contents for ALIEN654





























































































































































Search results

Summary of Contents for ALIEN654

Reviews:

Alien Hero ALIEN654, Operation Manual, Page: 82 / 156

Search results

Summary of Contents for ALIEN654

Reviews: