ALIEN HERO INSTRUCTION MANUAL
43
Last Revised 16/10/2013
5. Record and Capture Settings
5.1 Configuring Encoding Parameters
Purpose:
By configuring the encoding parameters you can define the transmission stream type,
the resolution and so on.
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and
initialise it.
Menu>Drives>General
Figure 5.1a Drives- General
Checking the storage mode in the Drives Menu
Click
Advanced
to check the storage mode in the Drives menu.
If the HDD mode is
Quota
, you can set the maximum record capacity and maximum
picture capacity. For detailed information, see
Chapter 10 - Configuring Quota
Mode.
If the HDD mode is
Group
, you can set the HDD group number. For detailed
information, see
Chapter 5 - Configuring HDD Group for Recording.
Figure 5.1b HDD- Advanced menu
Steps
:
Enter the Record settings interface to configure the encoding parameters:
Menu>Video>Encoding