ALIEN HERO INSTRUCTION MANUAL
127
Last Revised 16/10/2013
Select the camera (s) to be configured with the same OSD settings. You can also click
the Analogue checkbox to select all cameras.
Click the
OK
button to finish the Copy settings and back to the OSD Configuration
interface.
Click the
Apply
button to apply the settings.
Note
: You can also click the Restore to restore the current OSD settings to the default
parameters.
11.2 Configuring Privacy Mask
Purpose:
You are allowed to configure the four-sided privacy mask zones that cannot be
viewed by the operator.
Steps:
Enter the Privacy Mask Settings interface.
Menu > Video > Privacy Mask
Select the camera to set privacy mask.
Click the checkbox of
Enable Privacy Mask
to enable this feature.
Figure 11.2a Privacy Mask Settings Interface
Use the mouse to draw a zone on the window. The zones will be marked with
different frame colours.
Note:
Up to 4 privacy mask zones can be configured, and the size of each area can be
adjusted.
The configured privacy mask zones on the window can be cleared by clicking the
corresponding Clear Zone1-4 icons on the right side of the window, or click
Clear All
to clear all zones.