manualshive.com logo in svg

Alien Hero ALIEN654, Operation Manual, Page: 122 / 156

Share
Download
Alien Hero ALIEN654 Operation Manual Download Page 122

ALIEN HERO INSTRUCTION MANUAL

122

Last Revised 16/10/2013

Set the HDD property to R/W, Read-only or Redundancy.
Click the OK button to save the settings and exit the interface.
In the HDD Information menu, the HDD property will be displayed in the list.

Note:

At least 2 hard disks must be installed on your device when you want to set a

HDD to Redundancy, and there is one HDD with R/W (Read/Write) capability.

10.5  Configuring Quota Mode

Purpose

Each camera can be configured with allocated quota for the storage of recorded files.

Steps

Enter the Storage Mode interface.

Menu > HDD > Advanced

Set the

Mode

 to Quota.

Note:

 The device must be rebooted to enable the changes to take effect.

                                          Figure 10.5a   Storage Mode Settings Interface

Select a camera that you want to configure for quota. Enter the storage capacity in the
text fields

Max. Record Capacity (GB)

 as shown below.

Figure 10.5b   Configure Record Quota

You can copy the quota settings of the current camera to other cameras if required.
Click the

Copy

 button to enter the Copy Camera menu, as shown below.

Summary of Contents for ALIEN654





























































































































































Reviews:

No comments