Alien Hero ALIEN654 Operation Manual Download Page 59

Page: 59 / 156

ALIEN HERO INSTRUCTION MANUAL

Last Revised 16/10/2013

Select

Advanced

Figure 5.10b HDD Advanced

Check whether the storage mode of the HDD is Group. If not, set it to Group. For
detailed information, please refer to

Chapter 10 Managing HDD Group.

Select

General

in the left bar.

Click

to enter editing

interface.
Configuring HDD group.
Choose a group number for the HDD group.
Click

Apply

and then in display box, click

Yes

to save your settings.

Click

to return to previous menu.

Repeat the above steps to configure more HDD groups.
Select the Channels for saving the recorded files and captured pictures in the required
HDD group.

5.11 File Protection

Purpose:

You can lock the recorded files or set the HDD property to Read-only to protect
recorded files from being overwritten.

Protect files by locking the recorded files:
Steps:

Enter Playback setting interface.

Menu> Play

Figure 5.11a Playback

Select the channels you want to investigate by ticking the checkbox

Select the record type, file type and start/end time. Click Search to show results.
Click

Search

to show the results.

Figure 5.10c HDD General

Summary of Contents for ALIEN654





























































































































































Search results

Summary of Contents for ALIEN654

Reviews:

Alien Hero ALIEN654, Operation Manual, Page: 59 / 156

Search results

Summary of Contents for ALIEN654

Reviews: