manualshive.com logo in svg

Alien Hero ALIEN654, Operation Manual, Page: 134 / 156

Share
Download
Alien Hero ALIEN654 Operation Manual Download Page 134

ALIEN HERO INSTRUCTION MANUAL

134

Last Revised 16/10/2013

                                                          Figure 12.7c   Log Details

If you want to export the log files, click the Export button to enter the Export menu.

   Figure 12.7d   Export Log Files

Select the backup device from the dropdown list of

Device Names

.

Click

Export

 to export the log files to the selected backup device.

You can click the

 New Folder

 button to create a new folder on the backup device or

click the

Format

 button to format the backup device before exporting log files.

Note:

Please connect the backup device to the DVR before operating log export.

The log files exported to the backup device are named by exporting time, e.g.,

20110514124841logback

.

txt

(yyyymmddhhmmss)

12.8  Importing/Exporting Configuration Files

Purpose:

The configuration files of the device can be exported to local device for backup; and
the configuration files of one device can be imported to multiple device devices if
they are to be configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Tools > Import/Export > Import/Export Config File

Summary of Contents for ALIEN654





























































































































































Reviews:

No comments