ALIEN HERO INSTRUCTION MANUAL
121
Last Revised 16/10/2013
Figure 10.3c Local HDD Settings Interface
Select the Group number for the current HDD.
Note:
The default group No. for each HDD is 1.
Click the
OK
button to confirm the settings.
In the Attention box, click the
Yes
button to
finish the settings.
10.4 Setting HDD Property
Purpose:
The HDD property can be set to redundancy, read-only or read/write (R/W). Before
setting the HDD property, please set the storage mode to Group (refer to Chapter 10.3
Setting HDD Groups).
A HDD can be set to read-only to prevent important recorded files from being
overwritten when the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both on the
redundancy HDD and the R/W HDD simultaneously so as to ensure high security and
reliability of video data.
Steps:
Enter the HDD Information interface.
Menu > Drives > General
Select HDD from the list and click the Edit icon to enter the Local HDD Settings
interface.
Figure 10.4a Set HDD Property
Figure 10.3d Confirm HDD Group Settings