Algema BLITZLADER 2, Operating Instructions Manual

Page: 14 / 108

3 Description Eder GmbH
14 / 108 Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021
• By means of the cable winch*, the vehicle to be transported can be pulled over the
drive-up ramps onto the plateau during loading.
•
An adjustable wheel stop and a railing are used to secure the load.
• For an increased payload, the car transporter is equipped with a tandem chassis from
our own production at the rear. The original rear axle of the basic vehicle is integrated
into the chassis as a second axle.
• For empty runs, the third axle can be lifted as an option.
•
Optimum ride comfort thanks to air suspension on the rear axles.
3. Intended use
The car transporter is designed exclusively for transporting motor vehicles up to the
permissible total weight of the car transporter.
All safety regulations must be observed and all safety-relevant values must be complied
with in accordance with the respective technical data.
Any other use beyond this is considered improper. EDER is not liable for any damage
resulting from this.
Intended use also includes compliance with the maintenance obligation (
see "Care and
maintenance", page 65 ).
4. Foreseeable misapplication
EDER is not liable for personal injury or property damage caused by
misuse.
Misapplications include, but are not limited to, the following actions/applications:
-
•
-
•
Transporting people and/or animals
Transporting objects/goods that are not listed under
"Intended use", page 14 .
• Loading with too high payload
• Driving with poorly/unsecured load
• Exceeding the maximum speed limit
• Driving at inappropriate speed in bad weather conditions
• Driving with apparent parts wear
• Driving in damaged condition
• Driving with defective lighting
• Driving with tilted cargo bed
•
Using the loading area as a lifting device
• Exceeding the max. drawbar load or the trailer load