Algema BLITZLADER 2, Operating Instructions Manual, Page: 77 / 108

Eder GmbH 5 Care and maintenance
Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021 77 / 108
5.4.6 Checking the oil level and changing the oil
The oil tank of the electrohydraulics is located in the right front toolbox under the plateau.
Only use HLP22 hydraulic oil based on mineral oil according to DIN
51524. Other hydraulic oils and fluids can lead to functional impairments
and damage.
If the oil level in the oil tank is too high, small quantities of hydraulic oil
may escape from the ventilation integrated in the cover of the filler
opening when the tank is tipped open.
Oil level:
•
•
Check the oil level once a week. To do this, park the vehicle on a horizontal surface.
The plateau must be completely tipped down.
• As a rule, the oil level can be seen through the slightly transparent tank without having
to unscrew the cap.
• The oil tank should be filled with hydraulic oil up to approx. two centimeters below
the lower edge of the filler opening.
If the oil level is too low, unscrew the cover of the filler opening and top up with
hydraulic oil HLP22 according to DIN 51524 using a suitable funnel.
• Then screw the lid back in hand-tight.