Algema BLITZLADER 2, Operating Instructions Manual

Page: 67 / 108

5 Care and maintenance Eder GmbH
66 / 108 Operating Instructions Algema Blitzlader 2 Air - Edition
04/2021
Interval Measure further information
Weekly Check tire pressure (incl. spare
wheel), adjust recommended tire
pressure if necessary.
see "Checking the tires and
wheels", page 69
Check spring bellows of rear
axles and air lines.
Visual and functional check,
whistling due to leaks, see "Air
suspension", page 70
Shock absorbers and axles. Visual inspection, tightness and
damage
Tilt sensors at the rear lower end
of the plateau
Free movement and function, see
"Lubricating and greasing moving
parts", page 79.
Check oil level and top up if
necessary
see "Checking the oil level and
changing the oil", page 77
Check the function of the cable
winch*.
Visual and functional test
Check the rope of the rope winch*
for corrosion, dirt and rope
damage, replace the rope if
necessary.
See "Checking the steel wire
ropes ", page 72 and
separate anchoring of the
wire rope winch.
Semi-annually
or every 10,000
km
Clean, lubricate or spray
moving parts.
See "Lubricating and greasing of
operating parts", page 79
Checking the electrical wiring,
insulation and electrical
connections.
Visual inspection
Brake discs and pads on the rear
axles.
Visual inspection for strength
and smell
Axis 2:
See operating instructions for
basic vehicle
Axis 3: Wear limit
Brake disc: 13 mm
Brake pad: 4 mm
Check plateau and chassis for
damage.
Visual and functional test
Annual Have the cable winch* checked
by a competent person.
See also separate operating
instructions for the cable winch.
Eder GmbH 5 Care and
maintenance
Operating Instructions Algema Blitzlader 2 Air - Edition 04/2021 67 / 108
Interval Measure further information
Oil change hydraulic system. see "Checking the oil level and
changing the oil", page 77
5.3 Safety instructions for maintenance and cleaning
Operating materials and cleaning agents!
Oils and fats can cause allergic reactions.
°
Wear protective clothing (skin, eye, hand and foot protection).
°
Avoid any skin contact with solvents and lubricants.
°
Use protective creams.
Missing or dirty safety and warning signs!
Personal injury or property damage due to incorrect operation
due to lack of information.
°
Keep safety and warning signs clean, visible and legible at all
times.
Maintenance on the hydraulics!
Risk of injury from a hydraulic fluid escaping at high pressure.
Hydraulically moving parts can yield unexpectedly due to leakage.
°
°
Never touch lines and screw connections that are leaking.
° In the event of leakage, secure hydraulically moving parts
against unforeseen movement before reaching into the danger
zone.
Do not disassemble any hydraulic parts that are under
pressure.