Alcorn Mcbride V+ series, User Manual

Page: 85 / 276

Event Reference 5-3
E
ve
n
t
Ref
er
en
ce
Note
For a port to accept External events, it must be configured with
AMI
Product Wizard as an Alcorn McBride Show Controller (see Communicating
With Alcorn McBride Show Controllers in Chapter 4). Choose
Resources |
Ports…
to configure a port.
Example
– Internal Event Syntax
Event Data1 Data2 Data3
On Output1
Turns on Output1 in the local Show Controller.
Example
– External Event Syntax
Event Data1 Data2 Data3
On Port2 Output1
Turns on Output1 in a remote Show Controller connected to Port2.
Note
If you did not configure the Serial Port connected to the remote Show
Controller using AMI Product Wizard, you will need to replace any remote
resource names with their corresponding Index Numbers.