Alcorn Mcbride V+ series, User Manual

Page: 73 / 276

WinScript User’s Guide
4-35
W
inS
cr
ipt
G
u
ide
Add Trigger
Use this button to move a sequence from the Cues On Deck List to the SMPTE
Trigger List . The sequence will be tagged with the current time as a start
trigger. If the Send Triggers box is checked, the sequence will also be started. If
you accidentally move a sequence to the SMPTE Trigger List , you can move it
back to the Cues On Deck List with the Remove Trigger button. Note that the
sequence will not automatically trigger the next time this SMPTE timecode is
encountered unless the script is downloaded to the unit. The optimum procedure
for using the Cuelist is to rough in all the cues on a single pass, then download
the script and check the timing. Cues can then be precisely adjusted from the
main
Sequences List view or from the SMPTE Trigger view and re-
downloaded.
Remove Trigger
Use this button to remove a sequence from the SMPTE Trigger List . The
sequence will be placed back in the Cues On Deck List .
Control SMPTE
Check this box to send Set SMPTE Time , Enable SMPTE and Disable
SMPTE serial commands to a SMPTE Machine or Digital Binloop whenever
the Cue d Dialog's timer is started, paused or reset. The message will be
transmitted from the currently configured
Download Port , which is selected
using the Tools Menu .
Send Triggers
Check this box to send Sequence Start serial commands to the show controller
whenever a sequence is transferred from the Cues On Deck List to the SMPTE
Trigger List by clicking on the Add Trigger button. The message will be
transmitted from the currently configured Download Port , which is selected
using the Tools Menu .
Add Cue
Use this button to move a sequence from the Sequence List to the Cues On
Deck List . This allows you to create a list of sequences that will be assigned
SMPTE timecode triggers, and then dynamically move them to the Trigger List
as the show runs. Once the sequences are in the Trigger List , their start times
may be precisely adjusted from the main Sequence view or from the SMPTE
Trigger view. If you accidentally move a sequence to the Cues On Deck List ,
you can remove it with the Remove Cue button.
Remove Cue
Use this button to remove a sequence from the Cues On Deck List . The
sequence will be placed back in the Sequences List .