![Alcorn Mcbride V+ series User Manual Download Page 71](http://html1.mh-extra.com/html/alcorn-mcbride/v-series/v-series_user-manual_2892709071.webp)
WinScript User’s Guide
4-33
W
inS
cr
ipt
G
u
ide
This information is also available by clicking on the context help question mark
in the title bar of the dialog box.
Current Time
This edit box displays the Current Time. When running, it is updated at the
Frame Rate
, as determined by the
Unit Configuration Dialog
. When stopped,
the value in this edit box may be changed to alter the time at which the timer
will begin when the
Start Timer
button is pressed. The
Reset to Start
button
copies the value from the
Start Time
edit box into this box. Time values should
be entered in HH:MM:SS.FF format.
Edit Start Time
This edit box displays the proposed Start Time. The
Reset to Start
button
copies the value from the
Start Time
edit box into this box. Usually this will be
the beginning timecode for the show. Note that the timer may be started and
stopped without affecting (or using) this time. Time values should be entered in
HH:MM:SS.FF format.
Summary of Contents for V+ series
