Alcorn Mcbride V+ series, User Manual

Page: 159 / 276

Application Notes 7-15
Recycle is used at the end of each show to bring the DVD Players to the
beginning of the file in preparation for show playback. Make sure that there
are no triggers assigned to this sequence. It cannot be activated by any
switch closure. It is only activated by other sequences. This sequence does
not have the ability to be restarted and will not Autostart either. Essentially
the entire configuration has been set to an inactive state.
Just before Recycle ends we start another sequence: DVD PlayerSearched?.
DVD PlayerSearched? constantly checks the status of each DVD Player, so
it should be Loop Enabled. If even one of the players isn’t powered or is not
responding, the show cannot begin, but eventually the
SelectClip
commands inside the Search sequences will time-out and the show will
commence, even though a DVD Player may not be spun-up. When all
DVD Players are searched. the
ShowReadyFlag is set.