Alcorn Mcbride Digital Binloop HD, User Manual

Page: 91 / 137

Alcorn McBride Binloop User’s Manual Page 81
Programmer Port
The Programmer serial port is specifically intended to connect with a PC
serial port for configuring and programming the Binloop using the Binloop
software. This connection should be made with a straight-through (not
null) 9-pin serial cable, which is included with the Binloop.
Pin Signal
1 N/C
2 TXD
3 RXD
4 N/C
5 GND
6 – 9 Not Used
Ethernet
The Ethernet jack of the Binloop is intended to connect the Binloop to a
10/100 Ethernet network. This interface can be used by the Binloop
Configuration software to control the Binloop as well as download new
configurations. For other methods of Ethernet control, this interface also
provides a simple control interface that uses the Pioneer/AMI protocol
over the common Ethernet protocol called UDP. For more information
on how to use the Ethernet interface of the Binloop, please read the
section of this manual called
Controlling the Binloop .
MIDI In
The MIDI In connector accepts standard MIDI protocol commands for
control of the Binloop. Please refer to the section titled
Controlling the
Binloop for details on how to use the MIDI port.
Pin Signal
1 N/C
2 GND
3 N/C
4 MIDI In +
5 MIDI In -