Alcorn Mcbride Digital Binloop HD, User Manual

Page: 43 / 137

Alcorn McBride Binloop User’s Manual Page 33
Search Clip
Description: This command causes the Binloop to preload the specified video clip and then
pause on the first frame of the video. After this happens, the next
Play command
causes the video file to start playing from the first frame onward.
Command:
nnnnaaaSE
Parameters: nnnn is an ASCII file number between 0-1023
aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response:
R
Examples:
Search File 1 on Reproducer #2: 1R2SE
Search File 2 on Group #1: 2G1SE
Search File 52 on All Reproducers: 52*SE
Play / Resume
Description: This command will start playing a clip that was previously loaded by a Search
Clip command. This command will also resume playback when the reproducer
has been stilled or paused.
Command:
aaaPL
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Example: Search File 1 on Reproducer #2: 1R2SE
Play pre-searched file R2PL
Loop / Resume
Description: This command functions just like the Play / Resume command except that the
video loops once the end of the clip is reached.
Command:
aaaLP
Parameters: aaa is the address of the card(s) you want to process the command
Rxx
– Reproducer address between R1-R8
Gxx – Group address between G1-G13
* - Wildcard address for all reproducers
Response: R
Example: Search File 1 on Reproducer #2: 1R2SE
Loop pre-searched file: R2LP