Alcorn Mcbride Digital Binloop HD, User Manual

Page: 51 / 137

Alcorn McBride Binloop User’s Manual Page 41
Get Reproducer Filename
Description: This command requests the filename of the clip currently playing in the specified
reproducer. If the specified reproducer is not installed in the Binloop, there will
be no response. Keep in mind that using this command will briefly tie up the
Reproducer communication interface, so it is not recommended for use
immediately before or after time-sensitive commands (like Synchronous Play).
This command requires DBAP4 Controller firmware V1.17 or newer, and
Repro16V or Repro24D firmware V1.61 or newer.
If a clip is not playing, the
response will only be a Carriage Return (0x0D) character.
Command:
aaa?C
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R16
Response: xxxxxxxx.xxx
Example: Request clip filename of Reproducer #1: R1?C
Example Responses: Filename is SND00020.S24: SND00020.S24
Filename is VID00001.MPG: VID000001.MPG