Alcorn Mcbride Digital Binloop HD, User Manual

Page: 121 / 137

Alcorn McBride Binloop User’s Manual Page 111
Note 3: Connecting to the Binloop using Ethernet
Ethernet is a very common communication interface used to
connect devices together. Using the Binloop’s Ethernet
interface, you can download configurations and even control the
Binloop across an Ethernet network.
Ethernet is a very broad standard with many complexities that go
way beyond the scope of this manual. The intention of this
application note is to simply demonstrate how to connect a
Windows PC directly to the Binloop using Ethernet.
Preparation
This application note also requires that you have the Binloop
Configuration software installed on a PC, and that the PC is
connected to the Binloop via Ethernet. If you do not have this
software, refer to the
Binloop Configuration Software section
before continuing with this example.
As for the Ethernet connection itself, there are two ways to do
this. The most common way is to use standard Ethernet patch
cables and a network switch or hub. When you connect the PC
and the Binloop to the numbered ports of the switch, the status
LED’s of the switch should indicate a connection.
Another way to connect you PC to the Binloop over Ethernet is using an
Ethernet crossover cable, like the red one included with the Binloop
packaging. This cable allows you to connect the PC directly to the Binloop
without the need for a switch or hub.
Ethernet Switch
PC Binloop-HD
Network
PC Binloop-HD
Cross Over Cable
Standard Patch
Cables
(RED)