Alcorn Mcbride Digital Binloop HD, User Manual

Page: 16 / 137

Alcorn McBride Binloop User’s Manual Page 6
Playing Video
All of your hard work is about to pay off. Follow these step-by-step
instructions to play the test video in the Binloop.
1. If you have not already done so, connect a display to one of
the A/V outputs of channel #1 (HDMI, YPbPr, HD-SDI, or
Composite).
2. Insert the Flash card that is loaded with the Digital Binloop
HD test clip into the Compact Flash socket of channel #1.
3. Power-up the Binloop.
4. Wait for the Binloop to finish initializing. You can determine
this by watching status display and the ‘READY’ status LED.
5. Press the channel #1 test button. The channel #1 status LED
should turn green to indicate that the video is playing.
At this point, channel #1 should be outputting video and audio on the
rear-panel connectors, and this should be apparent on your display. If
it is not, please consult the
Troubleshooting Guide for help.