Alcorn Mcbride Digital Binloop HD, User Manual

Page: 87 / 137

Alcorn McBride Binloop User’s Manual Page 77
Connectors
This table lists all connectors on the Binloop Card Cage and their related
function. The connectors are all located on the rear of the Binloop. If the
connector is a single signal, then the signal is listed. If the connector
contains multiple signals, the connector's pins are identified in further
tables.
Connector Summary
Connector Type Function
Video RCA/F (Yellow) x 8 Composite Video Outputs
Component RCA/F Y, Pb, Pr x 8 Component Video outputs
HD-SDI BNC Female (up to 8) SMPTE 259M HD-SDI Digital Video Outputs
HDMI HDMI Female (up to 8) HDMI Interface for Digital Video and Audio
Unbalanced Audio RCA/F (Red-Wht) x 16 Unbalanced Stereo Audio Outputs (Right-Left)
Show Control DB-9/M RS-232 to Control System
Programmer Port DB-9/M RS-232 to Programmer
VSYNC BNC Female Blackburst Video Sync Input
SMPTE DB9/F SMPTE Input/Output
MIDI In DIN5/F MIDI In
MIDI Out DIN5/F MIDI Out
Parallel Control DB37/F Control and I/O
Balanced Outputs
1-4, 5-8
DB25/F x 2 Balanced Stereo Audio Outputs
AES/EBU & S/PDIF I/O DB37/F x 2 AES/EBU or S/PDIF Digital Audio I/O
CobraNet RJ-45 CobraNet Audio Network
Ethernet RJ-45 Ethernet Control