![Alcorn Mcbride Digital Binloop HD User Manual Download Page 54](http://html1.mh-extra.com/html/alcorn-mcbride/digital-binloop-hd/digital-binloop-hd_user-manual_2892715054.webp)
Alcorn McBride Binloop User’s Manual
Page 44
Message Examples
1
Play unsynchronized clip 1 on Reproducer 1 using wild card device
ID and wild card command format code:
hf0 h7f h7f h02 h7f h03 h30 h30 h00 h31 h00 h30 h30 h31 hf7
2. Play and loop unsynchronized clip 3 on Reproducer 5 using wild
card device ID and wild card command format code:
hf0 h7f h7f h02 h7f h03 h30 h34 h00 h31 h00 h35 h31 h35 hf7
3.
Play synchronized clip 21 on all Reproducers using wild card device
ID and wild card command format code:
hf0 h7f h7f h02 h7f h01 h36 h33 h00 h31 h00 h30 h32 h31 hf7
4.
Stop playback all channels (clip number is ignored):
hf0 h7f h7f h02 h7f h02 h36 h33 h00 h31 h00 h30 h30 h31 hf7
5.
Still playback of video on Reproducer 1 (clip number is ignored):
hf0 h7f h7f h02 h7f h04 h30 h30 h00 h31 h00 h30 h30 h31 hf7
6.
Start SMPTE:
hf0 h7f h7f h02 h7f h15 hf7
7.
Reset SMPTE:
hf0 h7f h7f h02 h7f h17 hf7
Using the MIDI Show Control protocol, the Binloop can play clips
numbered from 1 to 511 (i.e. VID00001.MPG to VID00511.MPG). These
files can either be played from the beginning and stop at the end, or they
can be commanded to play and loop at the end. Looping files play
continuously, seamlessly starting over at the beginning from the end,
until commanded to stop. To cause a video file to loop, you must add
512 to the clip number used in the command. Clip numbers 1 through
511 will be interpreted as non-looping by default, while 513 through 999
are looping. For example, to play clip 1 once you would send a 1 as the
clip number in the MIDI show control command. To play and loop clip 1,
you would use a clip number of 513 in the MIDI command (even though
the actual file number is still 1 on the reproducers flash card).
Since the clip number field is only 3 digits, the maximum file number
supported by the MIDI protocol is 999. That means that you can only
send a loop command for clips 1-487 (999-512=487).
Summary of Contents for Digital Binloop HD
