Alcorn Mcbride Digital Binloop HD, User Manual

Page: 37 / 137

Alcorn McBride Binloop User’s Manual Page 27
Get/Set SMPTE time
Description: This command will get or set the current SMPTE time.
Parameters:
hh = hours
mm = minutes
ss = seconds
ff = frames
Get Command:
CT
Response: hh:mm:ss.ff
Example:
Command: CT
Response: 01:59:59.30
Set Command:
hh:mm:ss.ffCT
Response: R
Example:
Command: 01:59:59.30CT
Response: R
Get/Set SMPTE Mode
Description: This command will get or set the operating mode of the SMPTE module.
Parameters:
x = mode number:
0 = read
1 = generate
2 = generate with V-sync
Get Command:
SO
Response: x
Example:
Command: SO
Response: 2
Set Command:
xSO
Response: R
Example:
Command: 2SO
Response: R