Alcorn Mcbride Digital Binloop HD, User Manual

Page: 50 / 137

Alcorn McBride Binloop User’s Manual Page 40
Get Reproducer Firmware Version
Description: This command requests the firmware version of the specified reproducer. If the
specified reproducer is not installed in the Binloop, there will be no response.
This command requires DBAP4 Controller firmware V1.17 or newer.
Command:
aaa?V
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Response: REPRO-HD Vx.xx
Example: Request firmware version of Reproducer #1: R1?V
Example Responses: Reproducer with V1.03: REPRO-HD V1.03
Get Reproducer Status
Description: This command requests the playback status of the specified reproducer. If the
specified reproducer is not installed in the Binloop, there will be no response.
Keep in mind that using this command will briefly tie up the Reproducer
communication interface, so it is not recommended for use immediately before or
after time-sensitive commands (like Synchronous Play). This command requires
DBAP4 Controller firmware V1.17 or newer, and ReproHD firmware V1.03 or
newer.
Command:
aaa?P
Parameters: aaa is the address of the card(s) you want to process the command
Rxx – Reproducer address between R1-R8
Response: Pnn
Parameters: nn is a number that represents the status of the reproducer
P00 – Error (Fault)
P01 – Stopped
P04 – Playing
P05 – Stilled
P06 – Paused
Example: Request status of Reproducer #1: R1?P
Example Responses: Reproducer is Playing: P04
Reproducer is Stopped: P01
Reproducer has an Error: P08