Alcatel Speed Touch Wireless, User Manual

Page: 156 / 362

Introduction
Configuration of the
STWireless
'Phonebook' web page
Configuration of the
STWireless 'CIP' web
page
9 Data Services - Classical IP & IP Routing
156 / 362
3EC 17766 AAAA TCZZA Ed. 01
9.2.5 Configuring the STWireless for CIP
After retrieving the LIS parameters, you must configure the
STWireless , according to these parameters.
This section describes in short the global procedure for
configuring your STWireless 'Phonebook' , a nd 'CIP' web page.
By default the STWireless is configured for aCIP VC as used in
the example of section 9.2.7. If this VC is appropriate to your,
and/or the ADSL provider's needs, nothing has to be configured
in the STWireless phonebook.
If this VC does not match the requirements, three other CIP
phonebook entries are available to add.
However, in the case none of the entries match, you must add a
CIP phonebook entry yourself.
Adding CIP phonebook entries is described in subsection 9.4.1.
The default CIP phonebook entry mentioned above is by default
configured for a LIS according to the example of section 9.2.7. If
this LIS configuration meets your requirements, nothing needs to
be configured, and your STWireless is ready for use.
However, if additional configuration is needed, you can configure
CIP members yourself.
The assignment of your CIP PVC to the CIP member can be done
implicit, or explicit, according the RFC1577 compliancy of the
remote access router.
Configuration of the
STWireless 'CIP' web page is fully described
in subsection 9.4.2.