Alcatel Speed Touch Wireless, User Manual

Page: 19 / 362

1 Speed Touch Wireless Quick Guide
19 / 362
3EC 17766 AAAA TCZZA Ed. 01
"
Preconditions :
Make sure your STWireless is turned on and finished its
Power On Self Test (POST).
The (portable) PCs, intended to be connected to the
STWireless , must have a WLAN adapter readily installed,
and must be configured as DHCP client.
"
Joining the STWireless WLAN network
As soon as the WLAN adapter detected the presence of the
STWireless WLAN network, you must push the 'WLAN' button
on the STWireless 's back panel to allow the WLAN adapter
to join the STWireless WLAN network.
Repeat this procedure for each (portable) PC you want to join
the STWireless WLAN network.
Refer to section 3.1 for more information.
Next to the WLAN clients, a 10BaseĆT Ethernet port on the back
panel of the STWireless allows wired Ehternet connectivity.
Use the included LAN cable to wire your PC's Ethernet port to
STWireless 's Ethernet interface.
Refer to section 3.3 for more information.
There is no difference between wired Ethernet and WLAN
connections for the STWireless , i.e. all network configurations are
equally valid for both.
Therefore, both are referred to as (W)LAN.
Refer to section 3.3 for more information.