Alcatel Speed Touch Wireless, User Manual

Page: 210 / 362

11 Networking Services - IP
210 / 362
3EC 17766 AAAA TCZZA Ed. 01
The following fields are shown:
Field Description
Intf Indicates the interface (Intf) to which the IP parameter set was
assignedto.
It can take several values depending on the packet services
that are active. The Ethernet (eth0) andthe Loopback (loop)
are always present.
Address Shows the IP address of the interface.
Netmask If available, it shows the Netmask of the interface.
Type Indicates the origin of the IP parameters.
It can take following values:
Value Description
Auto
User Implies that an additional IP parameter set
was added through the 'Initial Setup' web
page.
Extra
Implies that an additional IP parameter set
was added through the 'Routing' web page.
The default IP address 10.0.0.138 is also of
this type.
Temp Implies that this (additional) IP parameter set
was added via a PingĆofĆLife

.
Implies that the parameters were acquired
automatically through DHCP, or are typical
standard IP addresses (e.g. ' loop' ).
Transl This field indicates the translation performed.
It can take following values:
Value Description
None
NAT NAPT is performed on this address.
No address translation is performed on this
address.
Action Contains one of the two following action buttons:
Button Action
Delete an IP address from the list.
Add an IP address to the list.