Alcatel Speed Touch Wireless, User Manual

Page: 22 / 362

1 Speed Touch Wireless Quick Guide
22 / 362
3EC 17766 AAAA TCZZA Ed. 01
1.2.4 Select an STWireless Packet Service
As soon as you know the Connection Service on a VC, you can
attach a Packet Service to it.
Following combinations are possible:
Connection Service Packet Service
ETHoA (RFC1483 Bridging) IEEE 802.1D Transparent Bridging ( g g)
MAC Encapsulated Routing
PPPoE (implies RFC1483 Bridging) IEEE 802.1D Transparent Bridging (*)
PPPoA (RFC2364 PPPoA) PPPoAĆtoĆPPTP Relaying ( )
PPP & IP Routing
PPPĆtoĆDHCP Spoofing
CIP (RFC1483 Routing/RFC1577) CIP & IP Routing
(*) A PPPoE Client application must also be installed on your PC.
Criteria to prefer one Packet Service over the other for a given
Connection Service are enumerated below.
"
ETHernet over ATM (ETHoA)
If your application relies on protocols other then TCP/IP, e.g.
IPX/SPX, or PPPoE to name a few, select the bridge .
Select MER if multiple users want to share the Internet
connection.
"
PPP over ATM (PPPoA)
If your application relies on protocols other then TCP/IP, e.g.
IPX/SPX, or NETBEUI, or if you want to avoid NAPT, select the
PPPoAĆtoĆPPTP Relay .
If PPTP Tunneling is not supported by your PC's OS, and if you
want to avoid NAPT, select PPPĆtoĆDHCP Spoofing .
For all other cases use PPP & IP Routing . This allows you to
share the IP address obtained via PPP by the users on your
(W)LAN.
"
Classical IP (CIP)
In some special circumstances, advanced user can use the CIP
& IP routing Packet Service.