Alcatel Speed Touch Wireless User Manual Download Page 332

Page: 332 / 362

AppendixD

STWireless Layout and Behaviour

332

/ 362

3EC 17766 AAAA TCZZA Ed. 01

D.1

Front Panel Layout and LED Description

The

STWireless

features the following front panel:

The

STWireless

is equipped with 5 LEDs on its front panel,

indicating the state of the device:

Indicator

Description

Name

Color

State

LAN

Green

Flashing

Data is flowing from/to the

Ethernet port, and/or WLAN hub.

Off

No activity on both Ethernet

interface and WLAN hub.

Line TX

Green

Flashing

ATM cells are being sent over the

ADSL line.

Off

No transmission activity.

Line RX

Green

Flashing

ATM cells are being received via

the ADSL line.

Off

No reception activity.

Line Sync

Green

Flashing

During initialization of the ADSL

line.

ADSL line synchronization

achieved.

PWR/Alarm

Green

Power on, normal operation.

Red

Flashing

Power on, POST(*) pending.

Power on, POST(*) failed.

(*) Power On Self Test (POST)

Summary of Contents for Speed Touch Wireless











































































































































































































































































































































































Search results

Summary of Contents for Speed Touch Wireless

Reviews:

Brands by name

Popular brands

Alcatel Speed Touch Wireless, User Manual

Search results

Summary of Contents for Speed Touch Wireless

Reviews:

Brands by name

Popular brands