Alcatel Speed Touch Wireless, User Manual

Page: 243 / 362

Configuring the
STWireless Firewall
Default STWireless
Firewall configuration
13 Networking Services - Firewalling
243 / 362
3EC 17766 AAAA TCZZA Ed. 01
13.6 Firewall Configuration
In order to create a Firewall, suitable for your needs, you can
create a chain on every hook at the STWireless . In each chain
rules can be applied with configurable parameters. Rules can also
refer to a previously defined access list, thus allowing nested
access lists, or chains.
You can configure the
STWireless firewall only via the CLI.
See chapter 19 for more information.
The STWireless Firewall is enabled by default with following
behavior:
Packets migrating
"
from WAN to WAN are dropped
"
from STWireless to WAN are dropped, except Port 53 (DNS)
"
from STWireless to (W)LAN are allowed
"
from (W)LAN to STWireless are allowed
"
from (W)LAN to WAN are allowed
"
from WAN to (W)LAN are allowed
"
from a remote LAN to local (W)LAN are allowed
"
from local (W)LAN to a remote LAN are allowed.