Alcatel Speed Touch Wireless, User Manual

Page: 174 / 362

9 Data Services - Classical IP & IP Routing
174 / 362
3EC 17766 AAAA TCZZA Ed. 01
Proceed as follows to add multiple CIP members to the 'CIP
Interfaces' table:
Step Action and Description
1 Browse to the 'CIP' web page.
The bottom row of the 'CIP Interfaces' table allows addition of a new
CIP member.
2 Fill in the following CIP interface parameters:
Value Description
Local IP
Address
Mask
The associated netmask/subnetmask for
that local IP address.
The IP address at the additional CIP
member.
3
Click
4 Repeat steps 2 and 3 for each LIS you want to connect to.
5 For each additional CIP member, at least one CIP PVC must be
assigned. This can be done implicit, or explicit (according each
remote side's RFC1577 compliancy).
See the procedure in subsection 9.5.1 for adding CIP PVCs to the
'CIP Connections' table.
6
Click to store the changes in permanent memory.
The CIP members you created, appear in the 'CIP Interfaces'
table.
The CIP PVCs, you have added appear in the
'CIP Connections'
table.
However, check whether the remote IP addresses get resolved on
these new CIP members and their associated CIP PVCs.
If yes, check IP connectivity with the LISs via a ping utility on one of
the local PCs.
As your SP is responsible for the crossĆconnects, check whether he
supports this advanced configuration.