Alcatel Speed Touch Wireless User Manual Download Page 228

Page: 228 / 362

11 Networking Services - IP

228

/ 362

3EC 17766 AAAA TCZZA Ed. 01

Step

Action and Description

In the

'IP route'

table, you can configure an IP route, using the

table's bottom row.
Fill in thefollowing IP routeparameters:

Value

Description

Destination

Source

TheIP prefix of thesourcedevice(pool).
Specifying

any

, indicates that all traffic,

coming from the Ethernet interface, is

sent over this route

Gateway

TheIP address of thegateway.

The IP prefix of the destination, or

nextĆhop" device.

Note

: Seesection 11.1.1 for moreinformation on theprefix

notation.

Click

to store the changes in permanent memory.

Thecriteria for an IP routeto bevalid arethat:

The destination and source entries must yield correct prefixes

The gateway must be directly connected.

Summary of Contents for Speed Touch Wireless











































































































































































































































































































































































Search results

Summary of Contents for Speed Touch Wireless

Reviews:

Related manuals for Speed Touch Wireless

Brands by name

Popular brands

Alcatel Speed Touch Wireless, User Manual

Search results

Summary of Contents for Speed Touch Wireless

Reviews:

Related manuals for Speed Touch Wireless

Brands by name

Popular brands