Alcatel Speed Touch Wireless, User Manual

Page: 119 / 362

7 Data Services - PPPoAĆtoĆPPTP Relaying
119 / 362
3EC 17766 AAAA TCZZA Ed. 01
7.6.2 Local Tunneling
The STWireless allows local tunneling from behind an IP router:
IP Network 10
IP Network 172.16
10.0.0.138 10.0.0.1
172.16.0.1
172.16.0.3
172.16.0.2
Ethernet (W)LAN
IP Router Local PPTP tunnels
This requires settings in both STWireless and PCs.
You must add a default route for the STWireless via the 'Routing'
web page (See subsection 11.4.2 for more information).
In the example of the above figure, the route to be added, has the
following parameters:
"
Destination: 0.0.0.0/0
"
Source: Any
"
Gateway: 10.0.0.1
For each PC, you must add a route to its internal routing table.
This route must point to the STWireless . Proceed as follows for a
Windows OS:
Step Action and Description
1
Click , select 'Programs' , and ' MSĆDOS ' prompt.
2 At the DOS prompt, enter:
route add <Destination IPaddress>
<Gateway IPaddress>
In the example of the previous figure, the command would be:
route add 10.0.0.138 172.16.0.1
3 To verify IP connectivity, you can ping the STWireless . If it responds,
setting up PPTP tunnels is possible.