Mounting OS6855-14/P14 and OS6855-U10 Switches Table-Mounting OS6855-14/P14 and OS6855-U10 Switches
OmniSwitch 6855 Series Hardware Users Guide
September 2011
page 4-25
retainer fingers pointing down and slide the retainer bracket toward the power supply until it meets the
power cord connector. Insert two screws (provided) into the retainer clip slots and tighten until secure.
10
If no additional power supplies are required, skip to step 11. Otherwise, refer to the additional
information on redundant chassis power with PoE below.
Retainer bracket
Slotted retainer clip
Power cord connector
Power supply
